Please use this identifier to cite or link to this item:
Hawaii Deep Water Cable Program, phase II-D task 4 : Abrasion-corrosion studies
|1988-Aug-Phase II-D task 4 abrasion and corrosion.pdf||1.68 MB||Adobe PDF||View/Open|
|Title:||Hawaii Deep Water Cable Program, phase II-D task 4 : Abrasion-corrosion studies|
|Authors:||Liebert, Bruce E.|
|Issue Date:||Aug 1988|
|Publisher:||Department of Mechanical Engineering, University of Hawaii|
George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology
|Citation:||Liebert BE, Htun K, Tadjvar A, Larsen-Basse J. 1988. Hawaii Deep Water Cable Program, phase II-D task 4: Abrasion-corrosion studies. Department of Mechanical Engineering, University of Hawaii and George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology.|
|Abstract:||This Final Report is the combined report for two separate, but closely coordinated research efforts, one conducted at Georgia Institute of Technology and the other at the University of Hawaii. During the course of data evaluation it became apparent that combination of the results was both desirable and necessary, thus the combined report.|
An assessment is presented of the possibility that the Hawaii Deep Water cable may be damaged due to abrasion or abrasion-enhanced corrosion. The sites of potential damage are the several steep scarps in the deep water section of the Alenuihaha Channel. It is anticipated that during deployment the cable may become sus:pended between ledges and moved back and forth by the daily tidal currents.
|Appears in Collections:||Department of Business, Economic Development and Tourism|
The Geothermal Collection
Items in eVols are protected by copyright, with all rights reserved, unless otherwise indicated.